![]() The larger the tape’s surface area is in direct contact with the product or the wall, the stronger will be the bond between the two. In principle, the strength of the bond between the adhesive and the product is directly proportional to the surface area of their direct contact. The result is that with a bit of pull, the steel tape will detach from the wall. Therefore, with a bit of pressure, the partially bonded adhesive will leave either of the two surfaces. The rest of the steel tape is only attached to the moisture particles. Therefore, temporarily the steel tape loosely connects with the hard surface of the wall. When you install the KLAPiT steel tapes, the adhesive partially sticks to these loosely bonded moisture particles. Loose dust particles stick to KLAPiT and not to the frame Sometimes you can notice high moisture if you swipe the wall using dry tissue paper. These particles may not be visible on the wall. If you live in a coastal area, hills, or some other place with high humidity, you may have moisture particles sticking to your walls. The lesser is the adhesive bond with the wall or the product, the weaker will be the strength of the adhesive. As a result, with a bit of pull, the steel tape will detach from the wall. Therefore, the partially bonded adhesive leaves the wall’s or the product’s surface with a bit of pressure. The rest of the steel tape is only attached to the dust particles. Therefore, temporarily the steel tape remains on the wall as it loosely connects with the hard surface of the wall. When you install the KLAPiT steel tapes, the adhesive partially sticks to these loosely bonded dust particles. Moreover, moisture makes the dust particles stick to the surface firmly. Especially on the light-colored surfaces, dust particles are not visible. The walls and the surfaces often appear to be clean but have micro dust particles sticking on them. The NED magnet used in KLAPiT is of the strongest permanent magnet class of neodymium magnets.ĭo you wonder that despite using a strong double-sided tape, why does the painting fall? During our research, we found that this is because of the dirty surface most of the time. We ensure that KLAPiT steel tapes will never leave a stain after removal. Also, the VHB adhesive used in KLAPiT is different from the usual foam-based adhesives. This VHB adhesive tape is generally used in many industrial environments and can sustain adhesion in extreme temperature conditions. To keep its size small, we use the heavy-duty 3M VHB adhesive.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |